Model: P3D SINGLE BURNER User Guide
Table of Contents I. Important Safety Information 1 II. Product Specifications 2 III. How to Use 2 • Using the Temperature Setting 2 • Using the Timer Function 3 • Built-in Safety Shut Off 3 • Turning Off Unit 3 IV. Compatible Cookware 4 V. Cleaning and Maintenance 4 VI. Troubleshooting Error Codes 5 Thank you for purchasing the True Induction single burner unit. Please read the entire instruction manual prior to using your unit.
I. Important Safety Information When using electrical appliances, basic safety precautions should always be followed. For the True Induction cooker, even with the built-in safety features, it is essential to heed all precautions. - When the unit is on, do not touch outside the control panel as the surface may contain residual heat. - To protect against electric shock, do not immerse cord plugs or cooker in water (or other liquid substances).
II. Specifications Power: 1600 Watts Voltage: 120v / 60Hz Temperature Range: 150°F - 450°F (exact temperature settings) Level Selection: Select settings 1 through 10 Max Time: Set timer up to 150 minutes Material: Glass Ceramic Top Single Burner Unit Measurements: 12” width x 15” length x 1.2” height III. How To Use - Plug the power plug into a standard outlet. - The ON/OFF switch will light up and the unit will sound to indicate on. - The device will remain in standby mode, awaiting user direction.
Using the Timer Function: - After selecting the HEAT or TEMP mode, press the TIMER button once. The display will show the number “0”. Using the +/- keys, you can select the operating time in 5-minute intervals (up to max 150 min. ) and reducing in 1 minute intervals. - The display will count down the duration in minutes. Once the time is up, the unit sounds and automatically goes into standby mode. To continue cooking, press the ON/OFF button to restart.
IV. Compatible Cookware Induction requires pots and pans that are made of ferrous (meaning magnetic) materials. Check your cookware’s retail box for the induction symbol. To tell if your current cookware is compatible with the induction technology, grab a magnet and see if it holds to the bottom of the cookware. If your magnet stays on then your cookware is ready to be used on the True Induction single burner induction portable cooktop! Optimal cookware has a flat bottom and a diameter of 4.5” to 10”.
Troubleshooting Error Codes If the display shows an error code, please refer to this sheet for a potential solution. Error Code Cause and Potential Solution Cookware is not compatible with the induction cooktop. There is no cookware on the induction cooktop. “_ _ _” on display and beep sounds Make sure the cookware is induction compatible as explained on the previous page. E1 Voltage is under 75V E2 Voltage is over 145V E3/E4 The unit may be damaged, contact seller for support.
