Model: S2F2 DOUBLE BURNER User Guide
Table of Contents I. Important Safety Information 1 II. Product Specifications 2 III. How to Use 2 • Power Invariance Technology 2 • Using the Temperature Setting 3 • Using the Timer Function 3 • Built-in Safety Shut Off 3 • Turning Off Unit 3 IV. Compatible Cookware 4 V. Cleaning and Maintenance 4 VI. Troubleshooting Error Codes 5 Thank you for purchasing the True Induction double burner unit. Please read the entire instruction manual prior to using your unit.
I. Important Safety Information When using electrical appliances, basic safety precautions should always be followed. For the True Induction cooker, even with the built-in safety features, it is essential to heed all precautions. -When the unit is on, do not touch outside the control panel as the surface may contain residual heat. -To protect against electric shock, do not immerse cord plugs or cooker in water (or other liquid substances).
II. Specifications Power: ETL rated for 15 amp circuit Voltage: 120v / 60Hz Temperature Range: 150°F - 450°F (exact temperature settings) Level Selection: Select settings 1 through 10 Max Time: Set timer up to 150 minutes Material: Glass Ceramic Top Single Burner Unit Measurements: 23.5” width x 14” length x 2.5” height III. How To Use -Plug the power plug into a standard outlet. -The ON/OFF switch will light up and the unit will sound to indicate on.
Using the Temperature Setting: -After the unit is turned on, you can opt to use the TEMP setting. To do this, press the function key labeled TEMP one time. The pre-set temperature is 270 degrees Fahrenheit. -Using the +/- keys, you can change the temperature setting at any time. Settings range from 150-450 degrees Fahrenheit. (Exact temperatures: 150, 180, 210, 240, 270, 300, 330, 360, 390, 420. and 450°F) Using the Timer Function: -After selecting the HEAT or TEMP mode, press the TIMER button once.
IV. Compatible Cookware Induction requires pots and pans that are made of ferrous (meaning magnetic) materials. Check your cookware’s retail box for the induction symbol. To tell if your current cookware is compatible with the induction technology, grab a magnet and see if it holds to the bottom of the cookware. If your magnet stays on then your cookware is ready to be used on the True Induction single burner induction portable cooktop! Optimal cookware has a flat bottom and a diameter of 4.5” to 10”.
Troubleshooting Error Codes If the display shows an error code, please refer to this sheet for a potential solution. Error Code “_ _ _” on display and beep sounds Cause and Potential Solution Cookware is not compatible with the induction cooktop. There is no cookware on the induction cooktop. Make sure the cookware is induction compatible as explained on the previous page. E1 Voltage is under 75V E2 Voltage is over 145V E3/E4 The unit may be damaged, contact seller for support.
