TRUE INDUCTION DOUBLE BURNER TI-2B COUNTER INSET INDUCTION COOKTOP MANUAL DOUBLE BURNER TI-2B INDUCTION COOKTOP MANUAL 1 *Previous model# S2F3
TABLE OF CONTENTS Cooktop Installation Important safety Information Product Specifications How to Use > Power Invariance Technology > Using the Temperature Setting > Using the Timer Function > Built-In Safety Shut Off > Turning Off Unit V. Compatible Cookware VI. Cleaning & Maintenance VII. Troubleshooting Error Codes I. II. III. IV. 1-4 5-6 6 7 7 7 8 8 8 9 9 10 Thank you for purchasing the True Induction Double Burner Counter Inset TI-2B cooktop.
I. Cooktop Installation Dimensions and Placement for Cut-out in Countertop • Cut a rectangle hole in the countertop where the cook top is to be placed. The dimensions for the cut-out are 14 1/4'' x 23 3/4'' • The cut-out must be placed at least 2 1/2" from any side of the countertop. • To achieve flush mounting installation, use a router tool to round the corners of the hole cut into the countertop. 2 1/2’’ min *Outside Radius .
I. Cooktop Installation Continued... Building of supports for cooktop below the counter Any thickness of the countertop can be utilized, however, the thickness will determine if supports are built into the walls of the cut-out, placed below the cut-out, or be built out from the bottom of the cut-out. Two support beams between½'' and l" in width and 2" in depth should be placed lengthwise (spanning 23 11/16") 2 ¼" below the surface of the cut-out.
I. Cooktop Installation Continued... First feed the power wire through the hole and to the location of the power receptacle underneath the cabinet. The 'h'' overhang on the induction cooker comes with pre-installed foam gasket. Peel off the adhesive protector on the bottom of the gasket and set the induction cooker into the cutout. Gently press down on the induction cook top to secure the adhesive gasket to the countertop. The cook top should be sitting on the supports previously installed.
I. Cooktop Installation Continued... Clearance Needed for Air Circulation Below you will see a diagram of the air flow. Be sure not to block either the intake or exhaust For proper air circulation, allow at least 3" of clearance from the bottom of the induction cooker to any shelving or storage. The underside of the countertop should not be closed off from the cabinetry underneath for better air flow. 6 DOUBLE BURNER TI-2B COUNTER INSETINDUCTION COOKTOP MANUAL P.
II. Important Safety Information When using electrical appliances, basic safety precautions should always be followed. For the True Induction cooker, even with built-in safety features, it is essential to heed all precautions: When the unit is on, do not touch outside the control panel as the surface may contain residual heat. To protect against electric shock, do not immerse cord plugs or cooker in water (or other liquid substances).
II. Important Safety Information Continued... This appliance has a polarize plug (one blade is wider than the other). To reduce the risk of electric shock, the plug will fit on the outlet only one way. If the prongs do not fit fully, reverse the plug. If it still does not fit, contact the seller for warranty support; do not attempt to modify the plug in anyway. To properly turn off unit press the Power button.
IV. How to Use Plug the power plug into a standard outlet. The Power button will light up and the unit will sound to indicate on. The device will remain in standby mode, awaiting user direction. Place ferromagnetic cookware (with water, oil or food already inside) on the center of the glass-ceramic top center. Now press the Power button on the control panel, this will turn the cooktop on. The power display will blink and sound another indicator. Press the Heat function key once.
IV. How to Use Continued... Using the Timer Function After selecting the HEAT or TEMP mode, press the TIMER button once. The display will show the number "0." Using the +/ - keys you can select the operating time in 5-minute intervals (up to max 150 min.) and reducing 1 minute. The display will count down the duration in minutes. Once the time is up, the unit sounds and automatically goes into standby mode. To continue cooking, press the Power button and Heat button to restart.
V. Compatible Cookware Induction requires pots and pans that are made of ferrous (meaning magnetic) materials. Check your cookware's retail box for the induction symbol. To tell if your current cookware is compatible with the induction technology, grab a magnet and see if it holds. If your magnet stays then your cookware is ready to be used on the True Induction double burner induction portable cooktop! Optimal cookware has a flat bottom and a diameter of 4.5" - 10" inches.
VII. Compatible Cookware If the display shows an error code, please reference this sheet for a potential solution: Error Code Cause and Potential Solution E1 Voltage is under 95V E2 Voltage is over 145V E3 The unit may be damaged, contact the seller for support. E4 The unit may be damaged, contact the seller for support. E5 The unit may be damaged, contact the seller for support. E6 The cooking temperature is over 450 degrees Fahrenheit in the EG TEMP mode.
