Installation Guide

30" (76.2cm) Model TI-4B
Left Zone Right Zone
Using The Cooktop
Power Sharing
Four cooktops are divided into two
separate cooking area, the right and left
side cooking elements share power of a
inverter.
Power sharing is activated when the
cooking element in the same area are
activated; the controls adjust the power
automatically for “Power Sharing”. This
power sharing is administered by unit's
microprocessors, which will alternate
power in one area.
Power sharing tips: Remember to
select the power setting last for the
cooking element you want to maintain
at full setting heat. To maintain full
setting heat for two items, place one
item on a element in one section (left
side), and the other item on a element
in another section (right side).
Residual Heat Indicator
10
After using any of the Cooking
Element, the cooking area will
remain hot. Even after turning off the
entire unit, the surface of the
cooktop will remain hot for some
time. The digital display for the
Cooking Element will show an “H” to
warn the user that the surface is hot
to touch(Hot surface indicator) after
the Cooking Element switch off. Wait
until the “H” is no longer displayed to
clean the unit. You may turn the
Cooking Element back on even if the
“H” is displayed.