User Manual

IV. How to Use

 Plug the power plug into a standard outlet.

 The Power button will light up and the unit will sound to indicate on.

 The device will remain in standby mode, awaiting user direction.

 Place ferromagnetic cookware (with water, oil or food already inside) on the center of the

glass-ceramic top center.

 Now press the Power button on the control panel, this will turn the cooktop on. The power

display will blink and sound another indicator.

 Press the Heat function key once. The pre-set power level "5" is the default selection as the

device turns on.

 Using the +/ - keys you can change the settings at any time, ranging from 1- 10. This is con-

sidered to be the HEAT function.

Power Invariance Technology

The maximum power of an individual burner level is at setting 10. But, when operating both

burners their combined total is level 14, meaning that when operating the two burners at the

same time they'll self adjust levels accordingly:

 When you increase the power of one side, the power output of the other side will reduce au-

tomatically (i.e., one side is at 6, the other burner automatically reduces power to level 8 cre-

ating a total of max 14 setting).

 If one side of the double burner is using the HEAT function and the other side uses the TEMP

settings, the maximum HEAT setting is "9."

Using the Temperature Setting

Using the +/ - keys you can change the temperature settings at any time. Settings range from

150-450 degrees Fahrenheit. (Exact temperatures: 150, 180, 210, 240, 270, 300, 330, 360, 390,

420 and 450 F).

DOUBLE BURNER TI-2BN COUNTER INSETINDUCTION COOKTOP MANUAL P.6