Model: TI-4B USE AND CARE GUIDE 30 Inch Induction Cooktop Beveled Edge
TABLE OF CONTENTS Important Safety Instructions........................................................................1-4 Cooktop Features........................................................................................5-7 Using The Cooktop......................................................................................8-11 Operational Cooktop Noises...........................................................................12 Compatible Cookware..................................................
Important Safety Instructions IMPORTANT Keep these instructions handy for future use. The appliance is manufactured in compliance with the relevant safety standard. WARNING Read all instructions carefully before installation and operation of the appliance. WARNING Failure to follow these warnings could result in a fire or explosion that causes property damage, personal injury or death.
Important Safety Instructions WARNING Cleaning Safety IMPORTANT Environment of Unit To reduce the risk of fire, do not let any objects(glass, paper, etc.) obstruct the inlet and outlet of your cooktop. To reduce the risk of electric shock, do not mount unit over a sink. To reduce the risk of fire, do not store anything directly on top of the appliance surface when the appliance is in operation. Always have a working smoke detector in or near the kitchen.
Important Safety Instructions Environment of Unit Do not put detergents or flammable materials in the equipment installed under the cooktop . While cooking any overflowed fat or oil on the cooktop may ignite. There is a risk of burning and fire; therefore, control the cooking process at all times. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries. Items with a magnetic field such as: radios, televisions, credit cards, cassette tapes etc., can affect the unit.
Important Safety Instructions Service and Repair Safety WARNING Do not repair or replace any part of the appliance unless specifically recommended in the manual. All other services should be referred to a qualified technician. There are no user serviceable parts on this appliance. Only an authorized service representative should attempt to service your cooktop. This product may not be treated as household waste.
Cooktop Features 1. Left rear cooking e lement 5 2. Left front cooking element 1 3 3. Right rear cooking element 4. Right front cooking element 4 2 5. Ceramic glass 6. Left rear cooking element control area 8 7 6 9 7. Left front cooking element control area 8. Right front cooking element control area 30" (76.2cm) Model TI-4B 13 9.Right rear cooking element control area 11 10. Main Power On/Off 11. Main Power indicator light 12. Controls Lock 13.
Cooktop Features 18 14. Cooking element symbol 15. Power On/Off 16. Increase power 17. Decrease power 18. Power level and Residual heat display 15 16 17 14 22 19. Minute timer 20. Minute timer setting Up 21. Minute timer setting Down 22.
Cooktop Features Specifications Model TI-4B Product dimension ( wxdxh ) inch 30" x 21" x 2 1 8 " Cut-out dimension(wxd) inch Min .: 28 3 4 " x 19 3 4 " Max .
Using The Cooktop Controls Lock To Turn On The Cooktop While in the Standby mode, touch the Main Power key pad, a “beep” will sound and the indicator light above the Power key pad will be lit up, indicating that the induction cooktop functions are ready to use. The unit will automatically return to Standby mode if no cooking elements are set within 30 seconds.
Using The Cooktop Operating The Cooking Elements Power Boost Touch “+” key to level 9, then press once to enter into Boost mode, the power display will show a “P”.The 'Boost' function is used to cook at maximum power for a short period of time (maximum 10 minutes). The power is reduced to level 9 at the end of the maximum boost time. To turn on one or more Cooking Elements, place a compatible pot or pan on the desired cooking element.
Using The Cooktop Residual Heat Indicator Power Sharing Four cooktops are divided into two separate cooking area, the right and left side cooking elements share power of a inverter. Power sharing is activated when the cooking element in the same area are activated; the controls adjust the power automatically for “Power Sharing”. This power sharing is administered by unit's microprocessors, which will alternate power in one area. After using any of the Cooking Element, the cooking area will remain hot .
Using The Cooktop Set Timer The automatic timer settings range from 1 minute to 99 minutes. (NOTE: There is no “seconds” and “hours” display, only minutes.) The red dot next to the Time symbol indicator will illuminate indicating that the cooking elements is selected. If you want to set another burner to switch-off automatically, touch Timer key to until the desired time symbol indicator blinks, repeat the same steps above.
Operational Cooktop Noises Cookware Noise The induction fields are generated by electronics equipment, which are pretty much silent but they do produce heat at high power level. A softsounding cooling fan run when the unit is running multiple cooking elements at high settings at once or when a cooking element is set at very high power settings. Cookware with irregular or warped bottoms can vibrate audibly on the ceramic glass surface, though again typically only at high power settings.
Compatible Cookware The quality of your cooking is dependent on the cookware you use. Because induction cooking requires a magnetic vessel for heating, only certain materials can be used on your cooktop. Induction requires pots and pans that are made of ferrous(meaning magnetic) materials. Check your cookware’s retail box for the induction symbol. To tell if your current cookware is compatible with the induction technology, grab a magnet and see if it holds to the bottom of the cookware.
Cleaning Your Cooktop Please follow these directions along with Important Safety steps for cleaning, advised at the beginning of the manual. Use a ceramic glass cleaner on the glass cooktop. To maintain and protect the surface of your glass cooktop, follow these steps: Before using the cooktop for the first time, clean it to protect the top and makes cleanup easier. 1. Daily use of ceramic glass cleaner when the cooktop is cool will keep the cooktop looking new. 2. Shake the cleaning solution well.
Troubleshooting Guide If you encounter the following problems while using your cooktop, check the guide below to see if you can correct the problem yourself before calling for assistance or service: Problem Cooktop does not work Possible Cause Cooktop controls are locked Power outage Installation wire not complete Circuit breaker has tripped or fuse is blown No cookware or improper cookware placement on the cooking element Cooktop does not heat Incorrect cookware size for the selected cooking element C
Troubleshooting Guide If you encounter the following problems while using your cooktop, check the guide below to see if you can correct the problem yourself before calling for assistance or service: Problem Possible Cause Power boost does not work Solutions See Power Sharing The fans keep running for one minute after the cooking element has been switched off The electronics are cooling down This is a normal occurrence “E”appears in the Power display Electronics fault error message of particular coo
Installation Instructions IMPORTANT SAFETY INFORMATION WARNING Installation and service must be performed by a qualified installer or service technician. IMPORTANT Read and save these instructions for future reference. DANGER A lways read and obey all safety information, failure to follow these instructions can be killed or seriously injured. Before Installing the cooktop 1. Visually inspect the cooktop for damage. Also make sure all cooktop screws are on tight. 2.
Installation Instructions The Induction Cooktops must connect to a separate, grounded wire, single phase, AC Only electrical supply with their own circuit breaker. These appliances must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes. This appliance must be supplied with the proper voltage and frequency and amperage, which is protected by a properly sized circuit breaker or time delay fuse.
Installation Instructions IMPORTANT: Use the 4-wire cable from Home Power Supply where local codes do not allow grounding through neutral.
Installation Instructions Installation — 30" (76.2cm) Model TI-4B C A. Width B. Depth C. Height 30"(762) 21"(533) 2 1 8 "(55) * DO NOT obstruct these areas. IMPORTANT: For perfect ventilation, provide a vent of under the countertop, in the front of the cabinet and in the back of the cabinet. The ventilation opening is to extend the full length of the cooktop cutout.
Installation Instructions After Installation 1. Remove all the stickers and items from the top of the cooktop surface. 2. Clean cooktop before use. Dry with a soft cloth. See Cleaning Your Cooktop for reference. 3. Read Using The Cooktop. 4. Turn on the power to the cooktop. 5. Verify all function operation properly. NOTE: If the cooktop does not work, or you met any problem in your operation, please check that the circuit breaker has not tripped or the house has not blown.