Installation Instructions and User Guide

42
TRUE RESIDENTIAL
®
REQUIRED TOOLS:
• 3/8” Socket wrench
• Phillips screwdriver
KIT:
• 90º Hinge door stop
• Door stop bracket
1. Remove toe kick.
2. WARNING: Support the door while removing
hinge. Door is heavy and weight will cause it to
drop if not supported.
Remove 2 3/8” bolts to detach 120º door hinge
(standard).
3. Slowly remove door from unit by sliding down
from top hinge.
4. Install door stop using screws already installed.
Reinstall door by sliding up into top hinge.
5. Install 90º hinge with the 2 3/8” bolts that you
removed. Note: Do not tighten screws all the way
until door adjustments have been made.
6. Align door with lock latch and light switch.
Tighten screws.
2
3
4
5 6
INSTALLING THE 90° DOOR STOP
1