Install / User Guide

TRUE RESIDENTIAL
®
TEC_TM_009 Rev. B
December 31, 2019 Page 20 of 50
LEVELING THE UNIT
It is very important that the refrigerator sits level. This will insure that the doors will align and seal properly
and that the drain pans will not spill over.
TO LEVEL THE UNIT:
STEP 1. Place a level on the interior floor. Check and adjust so the unit is level from front to back, and left
to right.
STEP 2. Adjust the front legs using a set of pliers or a wrench.
STEP 3. Adjust the rear using a 7/16" socket and ratchet. Turn clockwise to raise the rear of the unit.
LEG ADJUSTMENTS
REAR LEG
ADJUSTMENT
FRONT LEG
ADJUSTMENT