Install / User Guide

39
15 INCH & 24 INCH INSTALL GUIDE
PRODUCT ADVISEMENT
ANTI-TIP BRACKET INSTALLATION
1
3.23.17 AC
TRUE RESIDENTIAL
®
211354
*211354*
STEP 1
Determine the location of the unit. The anti-tip
brackets will be installed 27/32" inset from the back
and sides of the unit. You can also measure 18 1/2"
from the front of the unit (not including the lower
louver grill). Using the bracket as a template, mark
the holes for drilling.
ALL FREE STANDING DRAWER (TUR-24D) OR STACKED UNITS MUST HAVE ANTI-TIP BRACKETS INSTALLED.
TIP-OVER HAZARD: A CHILD OR ADULT CAN TIP THE REFRIGERATOR. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT
IN PROPERTY OR BODILY HARM.
BEFORE MOVING UNIT TAKE PRECAUTIONS TO PROTECT THE FLOOR.
Read all installation instructions first. Install the anti-tip brackets to hold both rear legs of the unit. Follow these steps
to secure the brackets to the floor before moving the unit into final operating position.
Contact a qualified floor installer for the best procedure of drilling mounting holes through your type of floor.
TOOLS REQUIRED
• Power drill
• Measuring Tape
KIT INCLUDES
• 2 Anti-tip brackets
• 4 Concrete screws (blue)
• 4 Wood screws (brass)
IMPORTANT!
1
ANTI-TIP BRACKET (TOP VIEW)
Back
Front
27/ 32"
22
3/16"
18
1/2"