Instruction Manual

P2 analog OPERATION MANUAL
15
 As always, your ears are the final reference! The Stereo Phase Correlation Display
is provided as an accessory to help you with a potentially difficult and subjective part
of the recording/sound reinforcement process. But when all is said and done, what
you hear is more important than what you see on this Display.
 The Phase Display can become quite “busy” with complex sound sources. After mic
positioning has been determined, you may wish to turn off the flickering Display.
We’ve provided the ON/OFF selector for that purpose.
DESIGN APPROACH
P2 analog features a high-voltage composite architecture with discrete devices plus
integrated circuits. The totally balanced, dual servo, dc-coupled design provides
exceptional transient response, headroom, imaging and noise performance. Military
grade, hand-matched components are utilized in critical circuit areas. All signal
switching is done via hi-rel gold-contact relays in order to maintain an extremely short
signal path. These design features result in the transparent, detailed sound quality for
which TRUE preamps have become known.
SPECIFICATIONS
Gain, preamp: 3.5 to 52dB and 15.5 to 64dB (dual range)
DI: -16 to 32dB and –4 to 44dB
Frequency Response: 1.5 Hz to 500kHz (-3dB)
(gain=40dB)
Maximum Output Level: +31 dBu (+27 dBu in low gain mode)
Maximum Input Level: +15 dBu (+25 dBu in low gain mode)
Noise (Rs=0 Ohms): -132 dB e.i.n.
Slew Rate: >40 V/uS
CMRR (CMV= +10 dBu): 85 dB
THD (preamp) (+26dBu, 100kOhm) .0008%
Input Impedance, preamp: 5.5 Kohm
DI: 2.5 Mohm (impedance modification available)
Power Consumption: 22W
Enclosure Dimensions: 17.5 in. (44.5 cm) W, 13.75 in. (35cm) D,
1.75 in. (4.5cm) H
Front Panel Extension: 1 in. (2.5cm)
Weight: 15 lbs. (6.8kg)
Typical performance. Specifications subject to change without notice.