Instruction Manual

P2 analog OPERATION MANUAL
18
Authorization (RMA) number from SUNRISE prior to returning a product. SUNRISE may
require proof of the purchase date in the form of a copy of a dated original retail invoice.
This warranty is void if, in the sole judgment of SUNRISE, the product has been
abused, neglected, misapplied, or has been damaged by an accident, modification, or
attempted repair by unauthorized personnel. This warranty will not apply to cosmetic
damage incurred due to normal handling and use. SUNRISE reserves the right to
change or improve the product design at any time without prior notice. Incorporation of
design changes in future versions of the product does not imply the availability of
upgrades for existing units.
This warranty is in lieu of all other warranties, expressed or implied, and SUNRISE
specifically disclaims all implied warranties, including, but not limited to, warranties of
merchantability and fitness for a particular purpose. The purchaser acknowledges and
agrees that in no event shall SUNRISE be held liable for any special, indirect, incidental
or consequential damage, or for injury, loss or damage sustained by any person or
property, that may result from the use of, or failure of this product to operate correctly at
any time. In the USA, some states do not allow the exclusion or limitation of implied
warranties or liability for incidental or consequential damage, so the previous exclusion
may not apply to you. This warranty gives you specific legal rights, and you may have
other rights that vary from state to state.
SERVICE and SUPPORT INFORMATION
 Registered users may obtain customer support by calling [phone]. Please
ask for Tech Support. You may also visit our website: www.true-systems.com or
email us at: [e-mail].
 Other than cleaning the exterior surfaces of your P2 analog and occasional
inspection of the AC power cord and audio cables for damage, no maintenance
procedures should be attempted by the user. Exterior cleaning can be performed
using a lint-free cloth dampened with Windex or equivalent.
There are no user-serviceable components inside the product enclosure.
Many of the electronic components are selected and matched at the factory.
For this reason, as well as personal safety considerations, we recommend
that you refer servicing to TRUE Systems. If you choose to have repairs performed by
other qualified service personnel, we recommend they contact us prior to performing
repairs. We will be happy to advise them of any special repair considerations.
All units returned to SUNRISE or authorized TRUE systems repair facility must be
prepaid, insured and properly packaged. Purchaser must obtain a Return Material
Authorization (RMA) number prior to returning a product.
Sunrise Engineering and Design Inc. Tel: [phone]
1634 S. Research Loop, Suite 110 Fax: [phone]
Tucson, Arizona 85710 USA Email: [e-mail]