HEAVY DUTY STEAM MOP STM-500 USE & CARE MANUAL www.trueandtidy.
TRUE & TIDY One Year Limited Warranty True & Tidy products are warranted for 1 year from the date of purchase if the appliance is defective in materials or workmanship. True & Tidy will repair or replace (at our option) your unit during this period. Any replacement product will carry the remaining warranty of the original product. True & Tidy is not liable for any incidental, misuse, negligence or failure to follow True & Tidy’s Use & Care manual.
IMPORTANT SAFEGUARDS At True & Tidy, safe performance is our top priority with any consumer product, so that you can use and trust our products confidently. Please use and operate product with due care and attention placed on the following operating instructions and precautions. Carefully read all instructions before operating the steam mop for the first time.
PARTS & ACCESSORIES PARTS & ACCESSORIES A Handle D B Handle Bar C Main Body E D Steam Head E Mop Pad A F Carpet Glider COMPONENTS 1 Handle 2 Cord Hooks 3 Handle Bar 4 On/Off Power Button 5 Steam Control Knob 6 Water Tank Release Button 7 Water Tank 8 Water Tank Cap 9 Water Filter 10 Power cord 11 Steam Head Joint Model: Water Tank Capacity: Steam Ready Time: Input Voltage: Output Power: STM-500 450 ml 30 seconds 120v 1500 Watts B C F
ASSEMBLY INSTRUCTIONS 1. Attach the Handle to the Handle Bar: Press down on the circle release button located on the bottom of the handle and slide the handle in to the handle bar until the release button locks into place. 1 2 3 2. Attach the Handle Bar in to the Main Body: Press down on the circle release button located on the bottom of the handle bar and slide the handle bar in to the main body until the release button locks into place. 3. Make sure the release button is securely locked into place.
USING YOUR STEAM MOP FILLING THE WATER TANK 1. Remove the Water Tank Press down on the water tank release button and gently remove the water tank. 2. Open the water tank by unscrewing the water tank cap. 3. Fill the water tank with water. Screw the water cap back on and insert water tank in to the body of the steam mop. POWERING ON YOUR STEAM MOP 1. Plug in the appliance. Since this is a powerful 1500 watt appliance, please make sure your outlet and circuit can handle the wattage. 2.
CARE & CLEANING ： IMPORTANT Allow the steamer to fully cool down before performing any care & cleaning STORING YOUR STEAM MOP 1. After each use, once the steam mop is cooled down, empty the water tank and clean the external surface of the steam mop with a damp cloth. 2. Use the cord wrap to safely & securely wrap & store the power cord. 3. Remove the mop pad and wash it following the instructions below. 4. Store you steam mop in a dry area. CLEANING THE MICROFIBER MOP PADS 1.
CARE & CLEANING ： IMPORTANT Allow the steamer to fully cool down before performing any care, cleaning & troubleshooting DESCALING INSTRUCTIONS 1. Prepare a solution of 1/3 white distilled vinegar and 2/3 tap water and add to the water tank. 2. Plug in the cord and turn on the steam mop. 3. Let the steam mop produce steam until the vinegar/water solution runs out. 4. Repeat the above procedure as needed until a normal steam flow rate is achieved. 5. Fill the water tank with distilled water to clean. 6.
