Use and Care Manual
Prepare a solution of 1/3 white distilled vinegar and 2/3 tap water and add to the water
tank.
Plug in the cord and turn on the steam mop.
Let the steam mop produce steam until the vinegar/water solution runs out.
Repeat the above procedure as needed until a normal steam flow rate is achieved.
Fill the water tank with distilled water to clean.
Run the distilled water until it runs out.
DESCALING INSTRUCTIONS
1.
2.
3.
4.
5.
6.
WARNING
Do not leave the appliance unattended during the descaling process and/or while in use.
CARE & CLEANING
IMPORTANT
:
Allow the steamer to fully cool down before performing
any care, cleaning & troubleshooting
TROUBLESHOOTING
Visit www.trueandtidy.com for more troubleshooting, cleaning tips,
FAQ and customer service