Use and Care

23
True
traditional reach-ins
www
.truemfg.com
HOW TO CHANGE DISPLAY READOUT FROM
FAHRENHEIT TO CELSIUS:
May need to unlock control.
This can only be changed with the LAE model BR1 version of the control.
WHY: Changing readout will assist with customer application.
HOW TO CHANGE DISPLAY READOUT FROM
FAHRENHEIT TO CELSIUS:
STEP 1 - To change the display, press and hold the Info button and
the Stand-by button atthesametime.“MdL”willappear.Seeimage1.
STEP 2 - Push the Down button until“ScL”appears.Seeimage2.
STEP 3 - Press and hold the Info button toseethe“readoutscale”.
See image 3.
STEP 4 - While pressing and holding the Info button , press the up
or down buttontochangethe“readoutscale".Seeimage4.
STEP 5-Oncethe“readoutscale”hasbeenchanged,releasetheinfobutton
.
STEP 6 - Wait 30 seconds for the display to show temperature. See image 5.
1
2
3
4
5
LAEControl
Manual Activation
Up Button
Info / Set Point
Button
Stand-By
Button
Manual Defrost /
Down Button