Use and Care

29
True
traditional reach-ins
www
.truemfg.com
Remove the lampshield to reveal the
bulb. Squeeze the sides of the lamp-
shield at the same time pulling it away
from the bulb.
3
The lamp holders are spring activated. Pull
the top lamp holder up and push the bulb
down at the same time. This will leave
enough clearance to remove the bulb.
4
LIGHT BULB REPLACEMENT (IDL) INTEGRATED
DOOR LIGHTING
WARNING: When replacing a light bulb make sure power to the
unit is either turned off or unplugged.
IDL (INTEGRATED DOOR LIGHTING):
• Squeezetheplasticlampshieldtogetherandpullawayfromthe
door (See Image 3).
• Pushthebulbdownwhilepullingthespringactivatedlampholder
up. This will give you enough clearance to take the bulb out
(See Image 4).
GENERAL MAINTENANCE
LIGHT BULB REPLACEMENT (INTERIOR LIGHTS)
GENERAL MAINTENANCE
WARNING: When replacing a light bulb make sure power to the
unit is either turned off or unplugged.
Be careful when removing the light bulb. Please be aware of your local
ordinances in disposing old bulbs. These bulbs should be disposed in
a safe and correct manner.
 •Simplyunscrewthelightbulb(Seeimage1&2).
FOR ADDITIONAL MAINTENANCE INSTRUCTION,
PLEASE VISIT THE MEDIA CENTER AT
WWW.TRUEMFG.COM
1
InteriorLight
2
InteriorLight