Spec Sheet

Specications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone]
Fax [phone] • Toll Free [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
TRUE MANUFACTURING CO., INC.
U.S.A. FOODSERVICE DIVISION
TMC-34-DS-HC
INNOVATION
MADE WITH
IN THE USA
Milk Coolers:
Dual Sided, White and Stainless Steel Exterior/Clear Aluminum Interior with Hydrocarbon Refrigerant
TMC-34-DS-HC
** Width does not include ⁄" (4 mm) each side for lid pins.
† Depth does not include 1" (26 mm) for front bumpers. Depth does not include 1" (26 mm) for rear bumpers.
* Height does not include 5⁄" (130 mm) for castors.

True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures,
and lower utility costs in an attractive,
durable school milk cooler.

Dual sided for convenient access to
product from both sides of unit.

Factory engineered, self-contained,
capillary tube system using
environmentally friendly R290 hydro
carbon refrigerant that has zero (0) ozone
depletion potential (ODP), & three (3)
global warming potential (GWP).

High capacity, factory balanced, forced-
air refrigeration system maintains milk
temperatures of 33°F to 38°F (.5°C to
3.3°C). Colder holding temperatures
provide better tasting milk, increased
sales and less product waste.

Exterior - non-peel or chip white powder
coated cold rolled steel front, sides, back
and top; durable and permanent.

All stainless steel self-service doors
feature convenient drop front and "hold-
open" ip-up top. Standard with door
locks.

Interior - attractive, NSF approved, clear
coated aluminum liner with reinforced,
stainless steel oor.

Standard with heavy duty oor racks and
convenient clean out drain.

Designed to hold Eight 13"L x 13"D x
11 ⁄"H (331 mm x 331 mm x 296 mm)
milk crates.

Entire cabinet structure is foamed-in-
place using a high density, polyurethane
insulation that has zero ozone depletion
potential (ODP) and zero global warming
potential (GWP).
Model Doors
Capacity
Crate Dimensions
(inches)
(mm)
Floor
Racks
Cabinet Dimensions
(inches)
(mm)
HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)Crates W D H W** D† H*
TMC-34-DS-HC 4 8
13 13 11 ⁄ 2
34 33 41⁄
⁄ 115/60/1 2.7 5-15P
9 320
331 331 296
864
839 1058 N/A N/A 2.74 146
7/19