Spec Sheet

STANDARD FEATURES
Model:
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
PLAN VIEW
KCL
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
TMC-34-DS-HC
Milk Coolers:
Dual Sided, White and Stainless Steel Exterior/Clear
Aluminum Interior with Hydrocarbon Refrigerant
Model Elevation Right Plan 3D Back
TMC-34-DS-HC
TFQ085E TFQ062S TFQ085P TFQ0853
FRONT VIEW
RIGHT VIEW
34"
(864 mm)
33"
(839 mm)
35"
(889 mm)
1"
(26 mm)
1"
(26 mm)
41
5
/8"
(1058 mm)
5
1
/8"
(130 mm)
46
3
/4"
(1188 mm)
36
1
/8"
(918 mm)
DESIGN
•
True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures,
and lower utility costs in an attractive,
durable school milk cooler.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained,
capillary tube system using
environmentally friendly R290 hydro
carbon refrigerant that has zero (0)
ozone depletion potential (ODP), &
three (3) global warming potential
(GWP).
•
High capacity, factory balanced
refrigeration system that maintains
cabinet temperatures of 33°F to 38°F
(.5°C to 3.3°C) provide better tasting
milk, increased sales and less product
waste.
•
State of the art, electronically
commutated evaporator and
condenser fan motors. ECM motors
operate at higher peak eciencies and
move a more consistent volume of
air which produces less heat, reduces
energy consumption and provides
greater motor reliability.
•
Condensing unit accessed from behind
back grill, slides out for easy cleaning
and maintenance.
CABINET CONSTRUCTION
•
Exterior - non-peel or chip white
powder coated cold rolled steel front,
sides, back and top; durable and
permanent. Stainless steel service
doors.
•
Interior - attractive, NSF approved, clear
coated aluminum liner with reinforced,
stainless steel oor. Standard with
heavy duty oor racks.
•
Insulation - entire cabinet structure is
foamed-in-place using a high density,
polyurethane insulation that has zero
ozone depletion potential (ODP) and
zero global warming potential (GWP).
•
Welded, heavy duty steel frame rail,
black powder coated for corrosion
protection.
•
Frame rail tted with four (4) easy roll,
4" (102 mm) diameter swivel castors
(front castors lock in place).
•
Designed to hold Eight 13"L x 13"D x
11 ⁄"H (331 mm x 331 mm x 296 mm)
milk crates.
DOORS
•
All stainless steel self-service doors
feature convenient drop front and
"hold-open" ip-up top. Door support
bumpers standard.
•
Door locks standard.
•
Magnetic door gaskets of one piece
construction, removable without tools
for ease of cleaning.
MODEL FEATURES
•
Exterior digital temperature display.
•
Evaporator is epoxy coated to eliminate
the potential of corrosion.
•
Convenient clean out drain with ½" (13
mm) NPT-PVC drain plug.
•
Wide gaskets.
•
This unit meets Department of Energy
2017 standards.
•
Listed under NSF/ANSI Standard 7 for
the storage and/or display of packaged
or bottled product.
ELECTRICAL
•
Unit completely pre-wired at factory
and ready for nal connection to a
115/60/1 phase, 15 amp dedicated
outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 6" (153 mm) standard legs (mounting
plates required).
❑ 6" (153 mm) seismic/anged legs
(mounting plates required).
❑ Corner bumpers.
WARRANTY
Three year warranty on all parts
and laborand an additional 2 year
warranty on compressor.
(U.S.A. only)