Spec Sheet

Specications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone]
Fax [phone] • Toll Free [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
TRUE MANUFACTURING CO., INC.
U.S.A. FOODSERVICE DIVISION
TMC-49-HC
Milk Coolers:
White and Stainless Steel Exterior/Clear Aluminum Interior with Hydrocarbon Refrigerant
TMC-49-HC
** Width does not include ⁄" (4 mm) each side for lid pins.
† Depth does not include 1" (26 mm) for front bumpers. Depth does not include 1" (26 mm) for rear bumpers.
* Height does not include 5⁄" (130 mm) for castors.

True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures,
and lower utility costs in an attractive,
durable school milk cooler.

Factory engineered, self-contained,
capillary tube system using
environmentally friendly R290 hydro
carbon refrigerant that has zero (0)
ozone depletion potential (ODP), &
three (3) global warming potential
(GWP).

High capacity, factory balanced, forced-
air refrigeration system maintains milk
temperatures of 33°F to 38°F (.5°C to
3.3°C). Colder holding temperatures
provide better tasting milk, increased
sales and less product waste.

Exterior - non-peel or chip white
powder coated cold rolled steel front,
sides, back and top; durable and
permanent.

All stainless steel self-service doors
feature convenient drop front and
"hold-open" ip-up top. Standard with
door locks.

Interior - attractive, NSF approved, clear
coated aluminum liner with reinforced,
stainless steel oor.

Standard with heavy duty oor racks
and convenient clean out drain.

Designed to hold Twelve 13"L x 13"D x
11⁄"H (331 mm x 331 mm x 296 mm)
milk crates.

Entire cabinet structure is foamed-
in-place using a high density,
polyurethane insulation that has zero
ozone depletion potential (ODP) and
zero global warming potential (GWP).
Model Doors
Capacity
Crate Dimensions
(inches)
(mm)
Floor
Racks
Cabinet Dimensions
(inches)
(mm)
HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)Crates W D H W** D† H*
TMC-49-HC 2 12
13 13 11 ⁄ 3 49 33 41 ⁄
⁄ 115/60/1 2.7 5-15P
9 380
331 331 296 1245 839 1058 N/A N/A 2.74 173
INNOVATION
MADE WITH
IN THE USA
7/19