Specification Sheet

Specications subject to change without notice.
Chart dimensions rounded up to the nearest ⁄" (millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone]
Fax [phone] • Toll Free [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com
TPP-60D-2
Food Prep Table:
Drawered Pizza Prep Table
TPP-60D-2

True’s pizza prep tables are
designed with enduring quality
that protects your long term
investment.

Oversized, environmentally
friendly (R134A) forced-air
refrigeration system holds 33°F to
41°F (.5°C to 5°C).

Complies with and listed under
ANSI/NSF-7.

All stainless steel front, top and
ends. Corrosion resistant GalFan
coated steel back.

Stainless steel, patented, foam
insulated at lids keep pan
temperatures colder, lock
in freshness, and minimize
condensation.

Interior - attractive, NSF approved,
clear coated aluminum liner.
Stainless steel oor with coved
corners.

Extra-deep 19 ½" (496 mm) full
length removable cutting board
included. Sanitary, high density,
NSF approved white polyethylene
provides tough preparation
surface.

Heavy duty, PVC coated wire
shelves (door sections).

Each drawer accommodates two
(2) full size 12"L x 20“W x 8"D (305
mm x 508 mm x 204 mm) pans
(sold separately).
Model Doors Drawers Shelves
Pans
(top)
Cabinet Dimensions
(inches)
(mm)
HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)L** D† H*
TPP-60D-2 1 2 2 8 60¼ 33⁄ 35⁄ ⁄ 115/60/1 7.9 5-15P 7 445
1531 854 899 ⁄ 230-240/50/1 4.2 ▲ 2.13 202
** Length does not include⁄" (10 mm) each side for lid pins and¼" (7 mm) each side for cutting board brackets and thumb screws.
†Depth does not include 1" (26 mm) for rear bumpers and 3" (77 mm) for cutting board.
* Height does not include 6¼" (159 mm) for castors or 6" (153 mm) for optional legs.
▲Plug type varies by country.
Scan code
for video
Door or drawer assemblies can be located in any section of the cabinet. Location of
door/drawers must be indicated at time of ordering.
INNOVATION
MADE WITH
IN THE USA
3/17