Owner's Manual

Cardio
950
CHAPTER 2: ASSEMBLY GUIDE
True Fitness Technology • O’Fallon, MO • Phone: [phone] • Truetness.com
Page # 27 of 47
ASSEMBLY STEPS:
Step 12 (Power Cord Installation):
Insert Power Cord into Power Inlet shown to the right.
POWER SWITCH: — = ON, O = OFF
CIRCUIT BREAKER: In the event the current drawn by the treadmill exceeds a specied value, the Circuit
Breaker portion of the power on/o switch will operate. e rocker lever will automatically release and position
itself to a position half way between on and o, thus opening the power circuit.
If this should occur, please wait 10 minutes and then reset the Circuit Breaker by rocking the power switch fully
to the OFF position (O), and then rocking the power switch back to the ON position (-). If it does not reset, or
the Circuit Breaker operates again under normal use, contact True Fitness at 1-800-883-8783.
Note: e above picture shows the power switch in the OFF (O) position for reference.