Owner's Manual

Cardio
950
CHAPTER 2: ASSEMBLY GUIDE
True Fitness Technology • O’Fallon, MO • Phone: [phone] • Truetness.com
Page # 28 of 47
ASSEMBLY STEPS:
Step 13 (Unit Leveling):
Ensure treadmill incline rack wheels and rear feet are resting on the oor and not on cardboard, packaging, etc.
Using a 15/16 inch open end wrench, loosen nut A on Right Rear Foot (only side adjustable).
Using a level or estimating by sight, turn section B of foot clockwise, or counter-clockwise, using a 7/8 inch open
end wrench to level the rear of treadmill.
Tighten nut A until it is secured against bottom of treadmill. Note: e recommended gap between (A) and (B)
is 1/4” on a at oor.