Spec Sheet

STANDARD FEATURES
Model:
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
PLAN VIEW
KCL
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
TRCB-52-60
Chef Base:
Drawered Refrigerator
Model Elevation Right Plan 3D Back
TRCB-52-60 TFQY75E TFQY135S TFQY75P TFQY753
DESIGN
•
True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, exceptional
food safety and the best value in today’s food
service marketplace.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained, capillary
tube system using environmentally friendly
(CFC free) R513A refrigerant.
•
Oversized, factory balanced refrigeration
system with guided airow to provide uniform
product temperatures.
•
Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser; maintains cabinet temperatures of
33°F to 38°F (.5°C to 3.3°C) for the best in food
preservation.
•
Sealed, cast iron, self-lubricating evaporator
fan motor(s) and larger fan blades give True
chef base units a more ecient, low velocity,
high volume airow design. This unique
design ensures faster temperature recovery
and shorter run times in the busiest of food
service environments.
•
Condensing unit accessed from behind side
grill; slides out for easy maintenance.
CABINET CONSTRUCTION
•
Exterior - stainless steel front, top and sides.
Corrosion resistant GalFan coated steel back.
•
Interior - attractive, NSF approved, white
aluminum liner. Stainless steel oor with coved
corners.
•
Insulation - entire cabinet structure and drawer
facings are foamed-in-place using a high
density, polyurethane insulation that has zero
ozone depletion potential (ODP) and zero
global warming potential (GWP).
•
4" (102 mm) diameter plate castors - locks
provided on front set.
•
Cabinet top is one piece, heavy duty reinforced
300 series stainless steel. Drip resistant “V”
edge protects against spills. Supports up to
717 lbs. (326 kg).
DRAWERS
•
Stainless steel exterior drawer facings and
liners. Stainless steel drawer frames.
•
Each drawer tted with 12" (305 mm) long
recessed handle that is foamed-in-place with
a sheet metal interlock to ensure permanent
attachment.
•
Heavy-duty stainless steel drawer slides and
rollers. Removable without tools for easy
cleaning.
•
Magnetic drawer gaskets of one piece
construction, removable without tools for ease
of cleaning.
•
Each drawer accommodates three (3) full size
12"L x 20"W x 4"D (305 mm x 508 mm x 102
mm) food pans (sold separately).
•
Drawers support a wide variety of incremental
pan size congurations.
MODEL FEATURES
•
Evaporator is epoxy coated to eliminate the
potential of corrosion.
•
Exterior digital temperature display.
•
NSF/ANSI Standard 7 compliant for open food
product.
ELECTRICAL
•
Unit completely pre-wired at factory and
ready for nal connection to a 115/60/1 phase,
15 amp dedicated outlet. Cord and plug set
included.
RECOMMENDED OPERATING CONDITIONS
•
Counter-top cooking equipment should be
used in conjunction with the manufacturer
supplied legs. Minimum clearance of 4"
(102 mm) is required between bottom of
cooking equipment heating element and the
TRCB top. Failure to provide clearance voids
manufacturer warranty.
•
Installation of a heat shield is recommended
for optimum performance (supplied by others).
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 230 - 240V / 50 Hz.
❑ 6" (153 mm) standard legs (1 set of 4 leg
mounting plates required).
❑ 6" (153 mm) seismic/anged legs (1 set of 4 leg
mounting plates required).
❑ Heavy duty, 16 gauge top.
❑ Flat top (no marine edge).
❑ Additional size drawer divider bars.
❑ Drawer locks.
WARRANTY
Three year warranty on all parts
and laborand an additional 2 year
warranty on compressor.
(U.S.A. only)