User's Manual

TRUE RESIDENTIAL
®
TEC_TM_070 REV. B02/03/2021Page 38 of 74
5. The unit should be placed close enough to the
electrical supply so that extension cords are never
used.
6. Once installed in final location, insert toe kick by
clipping in place.
WARNING: COMPRESSOR WARRANTIES
ARE VOID IF THE UNIT IS MORE THAN 7
FT. (2.1M) FROM PLUG-IN CONNECTION
OR IF AN EXTENSION CORD IS USED.
INSTALLING THE TOE KICK
1. Remove from package that is taped to back of unit.
2. Line up and attach the toe kick to the bottom of
the cabinet using the magnets.
LEVELING REFRIGERATOR
1. Set unit in its final location. Be sure there is
adequate ventilation in your room.
2. Proper leveling of your True unit is critical to
operating success (for non-mobile models).
Effective condensate removal and door operation
will be effected by leveling. Adjust leg levelers on
the front and back of the cabinet if it needs to be
lowered or raised.
3. The unit should be leveled from the interior of the
unit front to back and side to side with a level. If the
refrigerator is not level adjust the stainless steel leg
levelers. The leg levelers can be adjusted by turning
to reach the desired leveling height as shown in the
illustration below.
4. Free plug and cord from back of cooler (do not
plug in).
Toe kick is attached
to back of unit