User's Manual

TRUE RESIDENTIAL
®
TEC_TM_070 REV. B02/03/2021Page 40 of 74
Cabinet door
Door stop
installed
Cabinet grill
Hinge
Door stop
ANTI-TIP BRACKET INSTALLATION
(CONTINUED)
5. With the appropriate provided hardware, install the
anti-tip brackets. See fig. 2.
NOTE: THE CONCRETE SCREWS ARE BLUE.
6. Carefully position the unit in its final installation
location. Be sure the rear leveling legs slide into the
anti-tip brackets. See fig. 3.
NOTE: DO NOT LIFT THE CABINET BY THE
COUNTERTOPS, DOORS, DRAWERS, OR
GRILLS.
INSTALLING THE 120° DOOR STOP
All units are provided with an optional door stop. When
installed, the door stop will restrict the door from
opening past approximately 120º to prevent damage
to surrounding cabinets. To install the door stop, use
the 2 screws provided and secure the bracket to the
bottom of the door on the same side as the hinge.