User's Manual

TRUE RESIDENTIAL
®
TEC_TM_070 REV. B02/03/2021Page 8 of 74
packing material
TOE KICK IS ATTACHED
TO BACK OF UNIT
REQUIRED TOOLS
• Cutting utensil (utility knife)
• Hammer
• Crowbar
• Phillips head screwdriver
The following procedure is recommended for
uncrating the unit:
MOVE YOUR UNIT AS CLOSE TO THE FINAL LOCATION
AS POSSIBLE BEFORE REMOVING THE WOODEN SKID.
A. Remove nails securing cardboard box to the
wooden skid. Then discard any outer packaging
(cardboard, clear plastic).
INSPECT FOR CONCEALED DAMAGE. AGAIN,
IMMEDIATELY FILE A CLAIM WITH THE FREIGHT
CARRIER IF THERE IS DAMAGE.
A B
C D
B. IMPORTANT: Cut green polyband and remove
styrofoam block before removing refrigerator from
pallet.
C. Remove skid by carefully lifting the refrigerator off
and place skid aside.
D. Open the unit and remove any packing material
Styrofoam, tape, and any other material used for
shipping purposes.
NOTE: KEYS FOR UNIT ARE PROVIDED WITH THIS
PACKET.
NOTE: ANTI-TIP KIT AND DOOR STOP ARE PACKED
INSIDE UNIT.
UNCRATING