User Guide

CONFIDENTIAL
8 (19)
CPE TPWLR58C1
Version 1.2
SYSTEM USER GUIDE
30 September 2015
8 Copyright © 2015 TruePath Wireless, LLC. All rights reserved. Reproduction in whole or in part without permission is prohibited. Information contained herein is subject to
change without notice. The specifications and information regarding the products in this document are subject to change without notice. All statements, information, and
recommendations in this document are believed to be accurate, but are presented without warranty of any kind, express, or implied. Users must take full responsibility for their
application of any products. Trademarks, brand names and products mentioned in this document are the property of their respective owners. All such references are used
strictly in an editorial fashion with no intent to convey any affiliation with the name or the product's rightful owner.
Figure 3 - Mounting a Client Station
The finned thermal heat sink allows the unit to dissipate enough heat such that no
additional environmental controls are needed.
2.1.2 Connecting a Client Station
As mentioned in previous sections, power and ethernet data connection are needed to
activate the client station. To accomplish this, two weatherized RJ-45 connectors and
cables should be plugged into the client station chassis and twisted to lock into place
(as shown in Figure 4). Additionally, weather sealing tape should be wrapped around
the connectors to provide another sealing layer (especially in humid or rainy
environments).
Mounting Bracket
Cylindrical Radome