User Manual

ManualsBrandsTruetone ManualsPower SuppliesVisual Sound 1 Spot Pro CS6

www.Truetone.com

IMPORTANT SAFETY INSTRUCTIONS

1. All the safety and operating instructions should be read before this

product is operated. Keep these instructions for future reference.

2. Pay attention to all warnings on the power supply and in the operating

instructions.

3. WARNING: Do not use this device near water or any other liquid.

4. Clean only with dry cloth.

5. Do not block any ventilation openings.

6. Do not use this device near any heat sources.

7. Do not remove the power plug grounding pin on the input cable.

8. Protect all input and output power cables from being walked on or

pinched.

9. Only use attachments/accessories specified by the manufacturer.

10. Use only with the brackets and screws provided with this power

supply.

11. Unplug this device during lightning storms or when unused for long

periods of time.

12. Refer all repairs to qualified personnel at Truetone or an authorized

Truetone distributor. Under no circumstances should the power

supply be opened by the user.

13. This lightning flash with arrowhead symbol within an equilateral

triangle is intended to alert the user to the presence of non-insulated

“dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock.

- WARNING: To reduce the risk of electric shock, do not remove cover

(or back) as there are no user-serviceable parts inside. Refer

servicing to qualified personnel.

- The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and

maintenance instructions in the literature accompanying the

appliance.

14. The maximum ambient temperature should not exceed 35 degree C.

15. Date code: YYMM, YY means year, MM means month. For example:

1612 represents Year 2016, December.

Owners Manual

CS 6 - pure isolated power

PRO

- 7 -

Summary of content (4 pages)

PAGE 1
IMPORTANT SAFETY INSTRUCTIONS 1. All the safety and operating instructions should be read before this product is operated. Keep these instructions for future reference. 2. Pay attention to all warnings on the power supply and in the operating instructions. 3. WARNING: Do not use this device near water or any other liquid. 4. Clean only with dry cloth. 5. Do not block any ventilation openings. 6. Do not use this device near any heat sources. 7. Do not remove the power plug grounding pin on the input cable.
PAGE 2
Mounting your 1 SPOT Pro CS6 under or on top of a pedalboard: The 1 SPOT Pro CS6 comes with three screws inserted into mounting screw holes on the top of the unit (spare screws are also included). These are for mounting your CS6 under pedalboards like those from Pedaltrain®. Just use the drill template included with your new CS6, to drill mounting holes under your pedalboard. Need some great pedals to go with your 1 SPOT Pro? Check out Truetone pedals at Truetone.
PAGE 3
Congratulations on your purchase of the 1 SPOT Pro CS6 Power Supply by Truetone! The 1 SPOT Pro CS6 provides 6 outputs to power just about any effect pedal. All 6 outputs are completely isolated, regulated, and filtered to provide quiet and safe operation for your valuable effects pedals. The 1 SPOT Pro CS6 contains the following in the package: The bottom panel of the 1 SPOT Pro CS6 contains 4 mini-switches that change the voltage of outputs 3-6. The switches are in the same order as the outputs.
PAGE 4
  For pedals with high milliamp draws such as Strymon, please utilize outputs 1 or 2 that can produce 500mA each. Eventide pedals such as the Time Factor and H9 may be powered by outputs 1 or 2 with the addition of the CL6 converter, for proper DC jack tip size and polarity.  Line 6 M5 may be powered by outputs 1 or 2.  Line 6 M9, and the modeling pedals (DL-4/MM-4), may be powered by outputs 1 or 2, and will also require the CL6 converter.