User Manual

The bottom panel of the 1 SPOT Pro CS6 contains 4 mini-switches that change
the voltage of outputs 3-6. The switches are in the same order as the outputs.
Switch 1: Output 3 – Off=9Vdc; On=18Vdc
Switch 2: Output 4 – Off=9Vdc; On=18Vdc
Switch 3: Output 5 – Off=9Vdc; On=12Vdc
Switch 4: Output 6 – Off=9Vdc; On=12Vdc
Note: Output numbers are not marked on actual unit.
Voltage Input:
The 1 SPOT Pro CS6 can be used anywhere in the world without the use of a
step-up or step-down transformer. It transforms wall voltage from 100-240Vac,
and converts it into the stated voltages on the bottom panel of the unit.
Which output and settings do I use for my pedals?
It is important for you to know the power requirements for your pedal. For every
pedal that you are going to power via the 1 SPOT Pro CS6, you need to know the
following:
1. What is the voltage required by the pedal?
2. Does the pedal require AC or DC voltage? (Hint: battery = DC)
3. What is the polarity of the pedal? (Center pin positive or negative.)
These questions can usually be answered by:
1. Inspecting the pedal itself near the power jack.
2. Referring to the owner’s manual.
3. Checking online, or contacting the manufacturer.
4. If your pedal can be powered by a 9Vdc battery, it can be powered by one
of the 9Vdc outputs (exception being the Boss ACA pedals, see below).
Notes on certain pedals:
 Some older Boss pedals require 12Vdc, yet can be powered by a 9Vdc
battery. They will indicate “Use ACA adaptor” near the power jack. To
power an ACA pedal please use outputs 5-6, and set to 12Vdc on the DIP
switch for the corresponding output. Modern Boss pedals will indicate
“PSA,” and can be powered by any of the 1 SPOT Pro CS6’s 9Vdc
outputs.
 Many germanium based fuzzes and Octavia-style pedals will require the
use of the CYR adaptor to reverse the polarity to center pin positive.
Congratulations on your purchase of the 1 SPOT Pro CS6 Power Supply by
Truetone! The 1 SPOT Pro CS6 provides 6 outputs to power just about any
effect pedal. All 6 outputs are completely isolated, regulated, and filtered to
provide quiet and safe operation for your valuable effects pedals.
The 1 SPOT Pro CS6 contains the following in the package:
1 SPOT Pro CS6 Power Supply
IEC input power cable
(3) mounting screws, (3) spare mounting screws and (1) drill template
Output power cables (all are center pin negative polarity):
(1) DC26 (5.5x2.1mm barrel plugs; 26” (660mm) – Purple
(1) DC22 (5.5x2.1mm barrel plugs; 22” (559mm) – Blue
(1) DC18 (5.5x2.1mm barrel plugs; 18” (457mm) – White
(3) DC12 (5.5x2.1mm barrel plugs; 12” (305mm) – Yellow
(1) MC2: Two 5.5x2.1mm barrel plugs with 5.5x2.1mm input socket
Converter Plugs:
(1) CL6 – Green – for Line 6 DL4/M9/etc. and some Eventide pedals.
(1) CYR – Red – reverse polarity converter
(1) C35 – Black – 3.5mm (1/8”) plug converter
(1) CBAT – Black battery clip
Specifications of the 1 SPOT Pro CS6:
Input: 100-240V~, 50/60Hz, 0.55A (Worldwide input voltage)
Outputs: 6 Outputs are marked on the bottom of the CS6:
Note: This symbol indicates DC voltage.
Output 1
- 3 - - 4 -
Output 2
Output 3
Output 4
Output 5
Output 6