User Manual

Need some great pedals to go
with your 1 SPOT Pro?
Check out Truetone
*
pedals at
Truetone.com
* Truetone was formerly known as Visual Sound; the makers
of Jekyll & Hyde, Route 66, H2O, Visual Volume and
The 1 SPOT!
Mounting your 1 SPOT Pro under a Pedaltrain
®
pedalboard:
The 1 SPOT Pro comes with 2 metal brackets, 4 black machine screws and 4
silver thread-forming screws. The black machine screws are for attaching the
metal brackets to the sides of the 1 SPOT Pro, and the thread-forming screws
are for attaching the brackets to the Pedaltrain
®
, as shown below. There is no
need to pre-drill holes for the screws if you are using a powered screwdriver.
Make sure the 1 SPOT Pro is
slanted during mounting, so that
the IEC input socket is in between the
rails of the Pedaltrain. To help position it
correctly, you can put a 9V battery under the
1 SPOT Pro (center-back of the unit), which
will raise the back to the proper height the
battery is only acting as a temporary spacer.
After the 4 thread-forming screws are installed, push the 9V battery out.