Blood Pressure Monitor Model:DB66-1 User Manual Rev.00 2019/03/14 Thank you for purchasing TRULY Blood Pressure Monitor. Please read through this "User’s Manual" before using the product.
Contents 1. Identification For Use ----------------------------------------------------------3 2. Safety Precautions -----------------------------------------------------------3 3. Quick start Guide 3.1 Charging 3.2 Monitor -------------------------------------------------------------5 -------------------------------------------------------------5 4. Taking Measurement 4.1 Sitting Correctly ------------------------------------------------------------6 4.
1. Identification For use Truly Automatic Arm Blood Pressure Monitor intended to measure the systolic and diastolic blood pressure and pulse rate of an adult individual by using a non-invasive technique in which an inflatable cuff is wrapped around the upper arm. The devices’ features include irregular pulse rhythm detection during measurement, and will display a alert signal with the reading when irregular heartbeat is detected.
- interference to blood flow and could result in injury to the patient； When measurement, The pressurization of the cuff can temporarily cause function of simultaneously used monitoring other device on the same limb； The pulse display is not suitable for checking the frequency of heart pacemakers； Do not use a cellular phone near the device, It may result In an operational failure； Do not use the monitor in the driving or flying vehicles； Frequenly measuring will make the blood not flow, cause the arm-numb
3. Quic ck Start Guide G 3.1 Charging - Charrging with the t power adapter when the ba attery indiccator - Therre will be tw wenkle - Whe en the batte ery is fully charge.batttery indica ator show low voltage. when charging. w disappear. will Adapter: Input:100-240Va.c. 0.2A;;Outp put: 5.0Vd.c. 1.0A uring charrging the blood b pres ssure monitor will not n be tes sted. Note :Du 3.2 Mon nitor Featuress z One touch ope eration otal Memo ory z 99 To z Bluetooth 4.
4 Tak king mea asureme ent Note: - Avoid d smoking g,eating or exercising for 30 minutes before b takiing measu urement. - Do not move or o talk durring measu urement. - Meas surement can be tak ken on eitther arm. 4.1 Sittting Corre ectly 1 Relaxx 2 Sit up pright in a chair with your both feet f on the e floor. 3 Remo ove tight fittting clothing from yo ou upper arm and thicck clothing g .
Irregularr Heartbea at 7 / 14
5 . Memory Functions After measurement,the last set of measured values will be saved automatically after measurement when the unit is turned off by pressing ““START/STOP””button or by automatic power off after 3 minutes. 5.1 View Past Readings 1 Press the “MEM”button to enter memory function, 2 First press the “MEM”button to display the“ AVG“ of last 3 values.second press to the “MEM”button will display first sets of value and so on. 3 This can stored up to 99 sets of past readings. 5.
Do not use alcohol,benzene,thinner or other volatile liquids to clean the unit. Do not wash or expose the arm cuff to liquid. The user must check that the equipment functions safely and see that it is in proper working condition before being used. WARNING: long power cable and air hose.To avoid strangulation and entanglement,keep cable and hoses out of reach of young children. 8. Product Specifications Model No.
9. EMC Declaration Guidance and manufacturer’s declaration – electromagnetic immunity The XXX” is intended for use in the electromagnetic environment specified below. The customer or the user of the “XXX” should ensure that it is used in such an environment.
EMC Declaration (Continued) Guidance and manufacturer’s declaration – electromagnetic immunity The “XXX” is intended for use in the electromagnetic environment specified below. The customer or the user of the “XXX” should ensure that it is used in such an environment.
EMC Declaration Guidance and manufacturer’s declaration – electromagnetic emissions The “XXX” is intended for use in the electromagnetic environment specified below. The customer or the user of the “XXX” should ensure that it is used in such an environment. Emissions test RF emissions CISPR 11 RF emissions CISPR 11 Compliance Group 1 Electromagnetic environment – guidance The “XXX” uses RF energy only for its internal function.
11. Disposal At the end of its use don't dispose the appliance, including removable parts and Accessories, together with the other urban waste, but conformably to 2002/96/EC. Since to be treated apart from home waste, you must take it to a differential collection centre specific for electric and electronic equipment. Otherwise you can give it back to the retailer as you buy an equivalent apparatus.
/ 14
