Datasheet

7111 | 7111QUAD | 7111HV
The new 7111 series counter is feature packed
and with a price performance ratio unrivalled,
suitable for thousands of applications.
Features
• Use of the latest CMOS circuitry achieves
an expected battery life of 10 years.
• Connection using built in screw terminals
(on all models).
• 9mm black high contrast LCD display.
• Backlight (externally powered) 5VDC.
• Counting up to 10kHz. (7111)
• 7111QUAD version quadrature signal
compatible. This permits add / subtract
counting in step with forward / reverse
motion without count loss or gaining
spurious counts.
• 7111HV permits triggering from any voltage
between 10-240VAC or 5-110VDC ±10%.
• Contact closure/open collector low speed
count input with integral de-bounce
circuitry (7111 model).
• Choice of mounting available, front panel
with supplied bezel or rear mounting clip.
• Front panel can be sealed to IP65.
• Installation is simplified - all models have
screw connections on rear for quick and
simple connection.
•
UL and cUL pending.
General Specifications
Battery
Non-replaceable Lithium battery,
expected life10 years at 20°C
Display 8 digit black LCD, 9mm characters,
leading zero blanking, backlight requires external
5VDC supply. Configurable decimal place upto 3
dec place (jumper link configured).
Count Range 99999999 - rollover to 0
Connections Finger-proof screw connections for
cables up to 1.5mm
2
Operating temperature -10°C to +60°C
Storage temperature -20°C to +60°C
Altitude Up to 2000m
Relative Humidity 80% max up to 31°C,
decreasing to 50% max at 40°C
Sealing IP65/NEMA4X
Mounting Either with clip mount supplied or two
front screws with bezel supplied.
Manual Reset Enable Configured by jumper link
P
ack
ed
W
eight
62 gr
ammes
Box Dimensions 56mm x 44mm x 62mm
Individual Product Specifications
Power Supply (7111QUAD)
External power supply to power internal count
input circuits 10-30VDC
External Reset (7111 | 7111QUAD)
Contact closure/open collector, negative edge
triggered, 0.7v threshold, 15mS minimum closure
time.
Direction Input (7111)
Connection or electronic input TTL/CMOS
compatible
. Add=no connection or >2.4v (logic
1); Subtract=connect to COMMON or <0.7v (logic
0). Direction input must precede count input by
5µS (minimum) for valid operation.
Low Speed Count Input (7111)
Contact closure/open collector with integral de-
bounce circuitry. 30Hz maximum, negative edge
triggered, 0.7v threshold, 15mS minimum closure
time. Max 18VDC.
High Speed Count Input (7111)
Electronic input 10kHz maximum, negative edge
triggered, 0.7v threshold 50µS minimum pulse
length, TTL/CMOS Compatible. Max 18VDC.
Quadrature Signal Inputs (7111 QUAD)
Electronic input 2.5kHz maximum, negative edge
triggered, 0.7v threshold 200µS minimum pulse
length, TTL/CMOS Compatible.
External Reset (7111HV)
10-110VDC ±10%, 10-240VAC ±10%, 50mS
minimum length.
Direction Input (7111HV)
Connection or electronic input
TTL/CMOS
compatible. Add=no connection or >2.4v (logic
1);
Subtr
act=connect to COMMON or <0.7v (logic
0).
Direction input must precede count input by
5
µS (minimum) for valid operation. Max 18VDC.
Count Input (7111HV)
10-110VDC
±
10% ,
10-240V
A
C
±
10%, 50mS
minimum pulse width,
10Hz.
Rear view screw terminal connections.
Typical Applications
• Replacement for electro-mechanical counters.
• Applications where external power is not
readily available.
• Position, length, rotation and distance
measuring applications.
• Event counting
Product Dimensions
Panel cutout 45mm x 22.5mm ( 0.771” x 0.885”)
ORDER INFORMA
TION
Order by type numbers of counter:
7111 Totalising counter
7111QUAD Up/Down with quad IP’s
7111HV Counter with HV inputs
l
ez
e
b
d
ex
i
f
-w
e
rc
S
•
)
n
i7
7
.
1
(
mm9.44
)
n
i9
8
.
1
(
m
m
8
4
)
n
i
7
1
.
0
(
m
m
3
.
4
m
m0.
4
2
)ni
5
9
.
0
(
m
m
0.
8
3
)
n
i
5
.
1
(
p
i
l
C
g
nix
i
F•
)n
i
1
.
2(
mm
4
.
3
5
)n
i
0
.2(
m
m
4.1
5
)n
i
3.0
(
mm
5
.7
m
m
9
.
1
2
)
ni
7
8
.0
(
Max
Production Line
7111 Bi-directional totalising Counter.
7111QUAD Totalising counter with quadrature inputs.
7111HV Bi-directional totalising counter with high voltage inputs.
Trumeter Company Ltd | Manchester | M26 1NX | UK. Tel: [phone] | Fax: [phone] | E-mail: [e-mail]