Datasheet

ManualsBrandsTRUMETER ManualsPanel-Mount InstrumentsAPM-PROC-ANO

Process Meter

with trurange

™

technology

Go to www.truAPM.com for further information

Featuring an acclaimed easy-to-read display and a versatile set of inputs, the Process Meter takes the APM into a

wide range of new industrial applications.

The programmable scale and custom annunciators mean users can tailor the meter to display their critical parameters exactly

how they want, while the dynamic backlighting, in conjunction with setpoints, means operators are visually alerted when a

parameter is out of range. The two outputs can be used to control other systems in the process, meaning the APM Process

Meter is much more than just a display.

trurange

™

technology brings a greater level of accuracy to the APM range through innovative input signal optimization. By using

this technology, accuracy of 0.1% or better is now achieved, allowing for more precise measurement, display and control.

Non-linear sensors, such as thermocouples and pressure transducers, can also be used thanks to the new APM Configurator

application that allows the user to configure upto 20 points in a non-linear conversion table.

alarm set points

Programmable 4 digit

star-burst display

Accuracy

Custom messages

& annunciators

2 physical digital and

analogue outputs

Programmable dynamic

backlight colour

Programmable

scale

user congurable

non-linearization

INPUT

OUTPUT

trurange

™

technology

Warning

flash

0.1

segment curved

bar graph display

0-10V / 4-20mA / 10 -50mA

User selectable Voltage & Current

Combined digital and

bar graph display

USB port for

custom user

settings

Easy to Use. Easy to Read.

Less

than

53mm

deep

Full 4 digit readout for accuracy

Summary of content (3 pages)

PAGE 1
Process Meter with trurange™ technology Easy to Use. Easy to Read. Programmable dynamic backlight colour 0-10V / 4-20mA / 10 -50mA Warning flash User selectable Voltage & Current 40 0.
PAGE 2
Key Features Large multi-format display that incorporates: Visibility: • 40 segment bar graph display • Large 4-digit display • Separate Starburst display area for annunciators, custom messages and alarm information • D ynamic backlight colour • • • • Programmable: Dimensions: Display Range (Both Min & Max Values) Custom annunciators User-selectable backlight color and intensity Two independent alarm set-points T wo independent outputs 4-20mA analogue monitor output INPUT VOLTAGE CURRENT Ran
PAGE 3
Fluid Level Application The APM Process Meter is used to display the volume of fluid in the tank. The 4-20mA analog output from the fluid level sensor is scaled to gallons, and the custom annunciator set to “Gal”, all via the easy-to-use software application. High and low setpoints are configured so that the normal green display will flash red when the tank is too full or empty, thereby alerting the operator.