Assembly Instructions

In the case of focusing optics BEO D50 Smart, the cooling
water temperature can be monitored within preset limits via the
cooling water monitoring module. For more information on this
topic, please refer to the software manual of the controlled focus-
ing optics.
1 Supply connection (at the cooling water monitoring
module)
2 Return connection (at LLK plug)
Connections at the BEO D50 Smart plug receptacle Fig. 2-24
From 600 W average power, the focusing optics is cooled at var-
ious cooling points:
■
Plug receptacle
■
Collimator
■
Lens
■
Cooling block on the cube
When using these cooling blocks, the hose system is designed
as shown in the examples (see "Fig. 2-25", pg. 2‐28).
The supply always reaches the plug receptacle first.
22-50-17-CRen
2020-01
Installation
2‐27
BEO D50 Smart
Additional cooling