Assembly Instructions
Assembly and installation
Commissioning of the focusing optics:
■
is done by a service engineer of TRUMPF during the com-
missioning of a laser device, if the focusing optics is deliv-
ered together with a laser device.
■
is done by the user after start-up of an existing laser device,
if you purchased the focusing optics afterwards.
The following conditions must be fulfilled:
■
The necessary safety equipment must have been installed
and must be ready for operation.
■
Suitable laser safety glasses must be at hand.
■
If additional media are required, they must be provided:
− Shielding gas
■
There must be enough samples for the commissioning proce-
dure. A suitable workpiece holder for the samples must be
provided.
22-50-17-CRen
2020-01
Assembly and installation
2‐3