Assembly Instructions

1 Crossjet
2 Purging gas connection
3 Air supply connection for cross-
jet
4 Connection for MDE nozzle
5 Outflowing MVE gas
6 Connection for shielding gas at
the gas monitoring module
7 Connection for MVE gas at the
gas monitoring module
8 Connection for purging gas at
the gas monitoring module
9 Connection for crossjet supply
air at the gas monitoring mod-
ule
Connections on BEO D50 Smart crossjet Fig. 2-27
Hot surfaces on the crossjet can burn your skin!
If the crossjet is bent (e.g. due to improper transport or a
crash), the laser beam will hit the crossjet and can heat
this up until it glows.
Ø
Avoid contact with hot surfaces.
Ø
Check the crossjet for damage during assembly.
Risk of injury when handling compressed air!
Injuries to eyes, skin and hearing.
Ø
Wear a pair of tight-fitting safety glasses.
Ø
Never clean body parts or clothes that are worn with com-
pressed air.
Ø
Use hearing protection.
Ø
Wear suitable gloves.
22-50-17-CRen 2020-01
Installation
2‐31
CAUTION
WARNING