Assembly Instructions

3.9 Connection for line laser
The line laser is supplied with 24 V.
Connection for line laser, M8 connector Fig. 2-32
Pin Supply line Designation Note
1 Brown +24 V Power supply:
3 Blue GND Central earth
4 Black TRIGGER On: high level +24 V
X1 – Connection for line laser, M8 connector, 3-pin Tab. 2-7
Note
The line laser can also be controlled via the image processing
software VisionLine; see the operator's manual "VisionLine",
doc. no.: 22-50-12-A0-CR.
3.10 Camera connection
Note
For further information about the observation optics, see the
operator's manual "VisionLine", doc. no.: 22-50-12-A0-CR and
the operator's manual "VisionLine Cam", doc. no.: 22-50-12-
A0-01-CR.
2‐36
Installation
2020-01 22-50-17-CRen