User Guide

Table Of Contents

1. Conduct in case of malfunctions

During daily work, malfunctions may occur which have to be rec-

tified before the regular operation can be started again.

1.1 Step-by-step procedure:

1. Identify the cause of the fault.

2. Take the recommended measures.

Actions carried out in order to rectify causes of

malfunctions might involve risks to you, to other persons

or to material property.

If such risks are not avoided, they can lead to death,

serious injuries or considerable damage to property.

Causes for malfunctions may only be remedied by persons

who are sufficiently familiar with the laser device.

Turn off the laser device, if it does not have to be con-

nected for the elimination of the malfunction.

Check the parts that carry dangerous voltage during opera-

tion for absence of voltage before touching them.

Wear the personal protective equipment if required for the

corresponding action (e.g. laser safety glasses, safety

gloves).

Observe the safety instructions of the manual and of other

documents.

3. Inform the service department of TRUMPF if you cannot

eliminate the malfunction yourself. Describe in detail how the

malfunction occurred.

1.2 Troubleshooting

To identify malfunctions, determine:

‐2

Conduct in case of malfunctions

2020-01 22-50-17-CRen

DANGER