User Guide

2.10 Interface for sensor module
1
C
T
-
0
0
4
7
1
1 Safety screws
Interface for sensor module, Example 90° Fig. 3-17
A sensor module for process monitoring is connected via this
interface. The sensor module detects the laser radiation
reflected by the workpiece and the radiation emitted from the
machining point.
There is no laser protective filter in the interface for the sen-
sor module. Therefore use of the eyepiece or camera at this
interface is not allowed. The interface is secured by way of
safety screws (hexagon socket screws with pin).
During operation of the focusing optics, the sensor module has
to be attached to the interface or the interface has to be pro-
tected against laser radiation emission by an aluminum sealing
plug.
There is no laser protective filter in the interface. If you
use the interface without sensor module or sealing plug,
your eyes and your skin may be exposed to laser light!
Laser light can burn your skin. Direct or scattered laser
light can permanently damage your eyes.
Ø
Never look into the interface.
Ø
Use the focusing optics only if the interface is closed by a
sensor module or a sealing plug.
Ø
Never attach eyepiece or cameras to the interface.
22-50-17-CRen 2020-01
Components
3‐23
WARNING