User Guide

Your eyes may be exposed to the laser light of the pilot
laser.
The laser light of the pilot laser can irreparably damage
your eyes.
Ø
Wear adjustment goggles that will protect the laser light
wavelength of 635 nm used.
1. Switch on the pilot laser of the shutter switch.
1 Clamping screw
2 Laser module
3 Clamping holder, line laser
4 Line laser
5 Adjusting screw (linear
adjustment)
6 Knurl for axial adjustment
Line laser and removed laser module Fig. 4-9
2. Switch on the line laser.
3. Undo the clamping screw (1).
4. Remove the black, anodized laser module (2).
5. Focus the laser line at the working distance using the stain-
less steel knurl (in the bottom part of the laser module).
6. Insert the laser module again and tighten the clamping
screw.
7. Adjust the laser line by turning the adjusting screw (5) such
that this lies exactly on the dot of the pilot laser.
8. Undo the clamping screw (1).
9. Axially adjust the laser line by turning the knurl (2).
10. Swivel the line laser such that the line of the line laser lies
exactly in the desired orientation.
22-50-17-CRen
2020-01
Adjusting the focal position
4‐15
Switch on line laser
WARNING
Focusing the laser line
Linear adjustment of the
laser line
Axial adjustment of the
laser line