User`s manual

Office Scan USB 19200
40
Figure 41: Settings
3. Select the document type (Figure 41).
4. Select 'Scanner' as the Page Source (Figure 41).
5. Click on 'OK'. The TWAIN dialog box (Figure 29) is opened.
6. Click on 'Prescan' to make a test scan.
7. Using the mouse, select the area you wish to scan.
8. Set 'Scan Mode' to 'LineArt' (black & white).
9. Set 'Paper Type' to 'Text'.
10. Set the resolution to 300dpi.
11. Click on 'Scan'.
12. After completing the scan, TextBridge will start the OCR process of the scanned
document and ask you if you wish to scan additional documents.
13. Click on 'More Pages' or 'Other Side' to scan more pages.
Click on 'No More' to stop scanning.
14. A window will then be displayed which will ask you to save the scanned text.
15. Under 'File Name', type a name for the text produced.