User`s manual

Office Scan USB 19200
3
1. Introduction
This manual is intended for users of the Office Scan USB 19200. No prior knowledge
is required for installation and use of this product.
If you have any questions after reading this manual, please contact one of the
Trust service centres. You will find information on the service centre nearest to
you at the back of this manual. You can also visit the Trust website
(www.trust.com) for support, comprehensive product information, drivers, and
FAQ (Frequently Asked Questions) sheets.
1.1 Conventions used in the manual
This manual uses the following layout conventions for instructions:
<
key
> Requires the user to press a key. The key legend is shown between
the angle brackets.
‘
System
’ This is a software-specific term, e.g. a term used by Windows.
[
DIR
] Text in this font is to be typed by the user.
(term)
The text between the parentheses (….) is the English term, e.g.
(File), referred to in the accompanying illustration.
Additional information is shown as follows:
Note
: Do not connect the scanner to a USB-HUB.
The examples assume that your computer system has assigned the letter “D” to your
CD-ROM drive. If your computer uses a different drive designation for your CD-ROM
drive, e.g. “E”, replace “D” in the text with “E”.
1.2 Contents of the package
Before reading the manual, please check the contents of the package. It should
contain the following:
•
Scanner
•
USB interface cable
•
Power supply adapter
•
CD-ROM with driver, TWAIN, electronic manual and applications
•
Quick installation manual
Please contact your dealer if anything is missing or damaged.