User`s manual

Office Scan USB 19200
6
2. Installing the scanner
2.1 Unlocking the transport lock
The scanner is shipped with the transport lock locked. The transport lock is on the
underside of the scanner.
Slide the transport lock to the 'unlock' position to use the scanner. Slide the transport
lock to the 'lock' position to transport the scanner.
Figure 1: Transport lock
2.2 Connecting the scanner to your computer
The scanner must be connected to your computer before use.
Tip:
USB equipment is hot swappable. This means that the equipment can be
connected and disconnected from your computer whilst it is switched on.
1. Remove the scanner from the packaging.
2. Place the scanner on a horizontal surface.
3. Connect the square USB plug to the rear of your scanner.
4. Connect the flat USB plug to a free USB port on your computer.
5. Connect the small power supply adapter plug to the rear of your scanner.
6. Insert the power supply adapter plug into a suitable wall outlet.