Quick Start Guide

Bluetooth Audio Speaker - USER’S MANUAL

Installation

A On/ Off switch

B USB power input

C 3.5mm Audio input

D LED indicator:

Blue flashing fast Pairing mode

Blue flashing slow Bluetooth mode

Green con tan Audio input mode

E Volume -

F Volume +

G Play, Pause/ Bluetooth pairing

H Charge LED

I 3.5mm Audio cable

J USB Charge cable

K Mini to Micro USB adapter

- Connect the USB charge cable to the USB port of your laptop or use your own micro usb power

adapter and ‘K’ to charge the speaker.

- Connect the USB charge cable to the USB power input ‘B’.

- Charge the battery for 3 hours.

- Power on the speaker by switching the power switch ‘A’ on the rear of the speaker.

- Press and hold the standby button ‘J’ for 3 seconds.

- The LED indicator ‘D’ will start flashing Blue (paring mode).

If the LED indicator is not flashing blue. Press and hold the play/pause button for 5sec.

If a passcode is requested during the configuration of the device Use ‘0000’.