ICS-2000 ONLINE MANUAL www.trust.com Item 71110 Version 1.0 Visit www.trust.
ICS-2000 OCTOPUS CONTROL STATION ICS-2000 OCTOPUS CONTROL STATION Index 1.1 Add a room 5 1.2 Edit/Delete room 6 2.1 Connect a new device 7 2.2 Connect a ZigBee bulb 10 2.3 Connect a ZigBee remote 14 2.4 Edit/delete device 16 3.1 Add scenes 17 3.2 Add/delete actions 18 3.3 Add/delete delays 19 4.1 Configure timers 20 4.2 Edit/delete timer 23 5.1 Configure rules 24 5.2 Edit/delete rule 27 6.0 Connect manually 28 7.
ICS-2000 OCTOPUS CONTROL STATION ICS-2000 OCTOPUS CONTROL STATION 1.1 1.2 A A C D B B C 1.1 Add a room 1.2 Edit/Delete room A Press the + button at the top of the screen to add a new room A To edit the name of a room press the pencil button at the top of the screen B Fill in a name for the room you want to add. B Press on the room name to begin editing. C Press the ADD button to save the new room C When you are done editing the name press the CONFIRM button.
ICS-2000 OCTOPUS CONTROL STATION ICS-2000 OCTOPUS CONTROL STATION 2.1 A B E F C D 2.1 Connect a new device A Press on a room name to open it. E Press the desired Product Line. B Press the + button at the top of the screen to add a new device. F Select the type of device you want to add to your room. C Enter a name for the device you want to add If you already control your Trust Smart Home receiver with a remote control or wall switch continue to step 7.
ICS-2000 OCTOPUS CONTROL STATION ICS-2000 INTERNET CONTROL STATION 2.2 I J A B H C D 2.2 Connect a ZigBee bulb H When the receiver is in connect/learn mode press CONNECT. Make sure the ZigBee bulb is close to the Control Station (Within 4 metres) I The device is now added to your room. You can now control the device with the App. A Press on a room name to open it. J Use the buttons to control the device. B Press the + button at the top of the screen to add a new device.
ICS-2000 INTERNET CONTROL STATION ICS-2000 INTERNET CONTROL STATION I J F E H E Select Trust Smart Home ZigBee Line H When the ZigBee bulb is in connect mode press CONNECT. F Choose for ZigBee light I The bulb is now added to your room. You can now control the device with the App. G Put the bulb in connect mode. (Check the manual of the bulb on how to put it in connect mode) J Use the buttons to control the device.
ICS-2000 INTERNET CONTROL STATION ICS-2000 OCTOPUS CONTROL STATION ICS-2000 INTERNET CONTROL STATION 2.3 M Arm K L 5 A C B 2.3 Connect a ZigBee remote K To change the color of a ZigBee bulb press on the color circle to open the color palette (Only for RGB or Cold/Warm bulb) First reset your ZYCT-202 ZigBee remote before you connect it to the ICS-2000. (Check the manual of the ZigBee remote on how to reset it). Keep the remote within 2 meters from the ICS-2000. L Choose the desired color.
ICS-2000 INTERNET CONTROL STATION ICS-2000 INTERNET CONTROL STATION 2.4 D B A C E D 2.4 Edit/delete device D The ZigBee Remote is now connected A To edit the name of a device first open the room which contains the device. To control a bulb which is already connected with the Control station it also needs to be connected to the ZigBee Remote.
ICS-2000 INTERNET CONTROL STATION ICS-2000 INTERNET CONTROL STATION 3.2 3.1 D C B A F B C D E A 3.1 Add scenes 3.2 Add/delete actions With a scene you can trigger different devices at the same time or with an delay. A Press the ADD ACTION button to add actions to the scene. A Press the scene button in the menu bar B Add the desired actions for the devices by pressing the buttons. B Press the + button at the top of the screen to add a new scene.
ICS-2000 INTERNET CONTROL STATION ICS-2000 INTERNET CONTROL STATION 3.3 E 4.1 D C B C A D B F 3.3 Add/delete delays It is possible to add a delay between actions. First add an actions like described in step 3.2 A Press the ADD DELAY button. B Choose how long the delay must be by selecting a time period. C Press the CONFIRM button to add the delay to the scene D The delay is now added to your scene. E By pressing the pencil button you enter edit mode. F Press the DELETE button to delete a delay.
ICS-2000 INTERNET CONTROL STATION E ICS-2000 INTERNET CONTROL STATION F G J H I E Choose the kind of start time for the timer. (In this example a fixed time is used) F Select the desired start time for the timer and press NEXT. G Choose which days and in which months the timer should be triggered. (By default all days and months are selected). Press NEXT 21 H Choose the desired actions for when the timer is triggered.
ICS-2000 INTERNET CONTROL STATION ICS-2000 INTERNET CONTROL STATION 4.2 5.1 N K L B M O D C 4.2 Edit/delete timer 5.1 Configure rules L Press the pencil button the enter edit mode. With a rule you can execute an action by choosing a trigger and action. M Press on the timer name to begin editing. A Press the RULES button in the menu bar N When you are done editing the name press the confirm button. B Press the + button at the top of the screen to add a new rule.
ICS-2000 INTERNET CONTROL STATION ICS-2000 INTERNET CONTROL STATION J G E F E Add a trigger by pressing the + button next to triggers. F Select a trigger to use to execute an action. (In this example a motion sensor is used as trigger) G Choose one of the linked devices H I H Add an action by pressing the + button next to actions. I An overview is shown of the available devices that have been linked. Choose an action for the desired devices. Press the CONFIRM button.
ICS-2000 INTERNET CONTROL STATION ICS-2000 INTERNET CONTROL STATION 6 5.2 A C B K M L MAC: 00-00-A2-00-12-11 O 5.2 Edit/delete rule 6 Connect manually L Press the pencil button the enter edit mode. A When there is no ICS-2000 found, it is possible to enter the MAC address manually during the registration process. Press the MANUAL button M Press on the rule name to begin editing. N When you are done editing the name press the confirm button.
ICS-2000 INTERNET CONTROL STATION ICS-2000 INTERNET CONTROL STATION B A C 7 Connect an existing device (Clone) This step is recommended when you already control your Trust Smart Home receiver with a remote control or wall switch. (Only for Startline products) A Press CLONE B A dialogue is shown to clone the signal of the transmitter C Give an ON signal on the transmitter that controls the device chosen in step 2.1f.