Instruction manual

TRUST DIRECT WEBSCAN 19200
1
UK
Method when using for the first time Chapter
1. Uninstalling old drivers and devices (3.1)
2. Installing the TWAIN driver (3.2)
3. Installing FineReader Sprint (3.3)
4. Installing Photo Express (3.4)
5. Connecting the scanner (3.5)
6. Testing (4)
1 Introduction
This instruction manual is for users of the TRUST DIRECT WEBSCAN 19200 V2.0.
The TRUST DIRECT WEBSCAN 19200 V2.0 is a 600x1200 dpi, high resolution,
USB scanner with a slim-line design. You can use it to produce optimal results with
48-bit colour scanning.
The Direct Scan buttons on the scanner allow you to easily scan, copy, fax and e-
mail at the touch of a button.
2 Safety
Carefully read the following instructions before use.
- The TRUST DIRECT WEBSCAN 19200 does not require any special
maintenance. Use a slightly damp, soft cloth to clean the scanner.
- Do not use aggressive substances, such as white spirit, to clean the device.
These may harm the material.
- Do not submerge the device in liquid. This may be dangerous and will
damage the device. Do not use this device near water.
- Make sure nothing is placed on the cable. Do not use this device in an area
where the cable can become worn or damaged as a result of people walking
over it.
- Do not repair this device yourself. If you open this device, you may touch live
components. This device must only be repaired by qualified personnel.
- Under the following circumstances, have the device repaired by qualified
personnel:
- The cable or plug is damaged or worn.
- The device has come into contact with rain, water or another liquid.
!

Summary of content (14 pages)