User`s manual

GXT 23 Gaming Mouse - USER’S MANUAL
2
Mouse layout
- Button 1. (default function = left mouse click)
- Button 3. (default function = middle click)
- Button 2. (default function = right mouse click)
- Button 4. (default function = scroll up)
- Button 5. (default function = scroll down)
- Button 6. (default function = DPI cycle)
- LED light. Blue= Mode1, Red= Mode2
Off= DPI #1, dimmed= DPI #2, full= DPI #3
Installation
- Insert the Trust CD-ROM into your CD drive.
- Click “Run Setup.exe – Published by Trust International BV”.
- Click “Install driver”.
- Click ‘Finish’ when the installation is finished.
- Connect the mouse to the USB port of the PC.
- Wait until the message ‘Your device is ready to use’ appears.
- Start the mouse configuration software.
- You can now start to configure the mouse.
- In the following part of the manual there be refered to the ‘Apply’ function that updates the mouse.
‘Apply’ is located at the bottom of the main window.
The mouse can store 2 different modes. You can instantly switch between the 2 mode setups by assigning a
mouse button as mode switch.
You don’t need to click on ‘Apply’ after every single change. You can make all the changes that you want and
then click ‘Apply’ to update all changes directly to the mouse.