User guide

114
It is important to choose a strong password. It is possible to leave password fields blank
but we strongly recommend using strong passwords! Be careful to remember passwords
because neither manufacturer can decrypt images and get your data without login and
password knowledge. «
10.5.1.4.7 Set Password for a user account
██ Setting password is an administration operation and can be used for setting the password for any
user account. The administration rights are necessary for this operation. It is also possible to change
password for other administration accounts. This functionality is available only when the opened image
is not currently being mounted.
It is important to choose a strong password. It is possible to leave password fields blank
but we strongly recommend using combination of small and capital letters and numbers
of minimum length of 8 characters as a password. «
10.5.1.4.8 Mount/Unmount opened image
██ An opened image file can be mounted without necessity to enter your credentials again. Editor
remembers the credentials, entered during opening of image and uses them also for mounting to the
system. The mounting letter is chosen automatically in this case.
The number of available disk letters is limited to 26 (A-Z). If there is no available letter
in the system for mounting an image, mounting operation will fail.
The image that is going to be mounted mustn't be compressed or encrypted by the NTFS
file system. If Disk Protection detects that the mounting image is compressed then
decompresses it automatically.