User Manual

Calibration

Calibration adjustment is permanent and

should only be performed using accurate

calibration weights that match the

requirements for your scale (see the chart on

back). Do not use coins or other household

items to calibrate.

1. Prepare the required weight for your scale. (see

chart on back)

2. Find a at and level surface to perform calibration

and let the scale adjust to room temperature.

3. Press to turn the scale on and wait for the scale

to stabilize.

4. Press and hold the M key until the display shows

‘CAL’.

5. Make sure nothing is on the platform then press M

to conrm the zero point.

6. The display will then ash the required calibration

weight.

7. Place the required

calibration weight on the

center of the platform.

8. The display will show

‘PASS’ then return to

normal weighing mode.

You may now turn the

scale o or continue

weighing.

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

TARE

CAL