User Manual

___
2
___
Level Side Rails: For optimal latching
performance and cover t, side rails must
be level. Raise or lower male clamps until
rails are level, then tighten clamps.
LOWER CLAMP CORRECT POSITION RAISE CLAMP
OUTWARD TILT LEVEL INWARD TILT
Clamp congurations shown are for reference only
and are not intended to be standard for all pickups.
Install Side Rails: With tailgate closed, align side
rails ush with pickup bed rails and level with
each other. Lightly compress D-seal against
tailgate. Clamp side rails to bed rails, placing
two clamps on xed portion of rails near ends
of rails. Tighten securely.
c l a m p
a s s e m b l y
s i d e
r a i l
b e d r a i l
d-s e a l
t a i l g a t e
High Bed Caps -
Adjust side rail height as needed to get a good
seal at front and back of cover.
Tighten clamps securely on side rails
before driving vehicle.
WARNING
!
p a s s e n g e r ’s
s i d e r a i l
s a f e t y s t r a p s
FRONT OF
TRUCK BOX
c o v e r a s s e m b l y
u n d e r b o d y r a i l
c l a m p s
w a s h e r
c a p
s c r e w
d r i v e r ’s
s i d e r a i l
d-s e a l
e n d p l u g
CLAMP
ASSEMBLY
SIDE RAIL AND COVER INSTALLATION
1
2