User's Manual

- 28 -

4. Power-on Utilities

There are three power-on utilities to set up and test printer hardware. These utilities are

activated by pressing FEED button ( ) then turning on the printer power ( ) simultaneously

and release the button at different positions of LED indicator.

4.1 Power-on Utility for Standard Panel

Please follow the steps below for different power-on utilities.

1. Turn off the printer power switch.

2. Hold on the FEED button ( ) then turn on the power switch ( ).

3. Release the power switch ( ) when LED color turn on amber.

Note: In this moment, you should still hold on the FEED button.

4. The printer will beep sound twice later, then release the button ( ) when battery LED

indicates with different positions for each function.

Power on utilities

for standard panel

The battery LED light will be changed as following.

LED

(5 blinks)

Release FEED

button ( ) for

different functions

Media sensor

calibration

(Please refer to 4.1.1)

Media sensor

calibration, self-test

and enter dump mode

(Please refer to 4.1.2)

Printer initialization

(Please refer to 4.1.3)